Giddings, TX

WO-TNFR274384 upon my arrival in Giddings, we installed the secondary emergency pan on the A/C unit. Performed a heat transfer media cleaning. Redid the water removal system piping, installed new water safety devices. Checked operations after repairs and found it it be working properly.

Upon arrival in Giddings, I performed diagnostic on A/C system, found unit low on refrigerant, client chose to wait on repairs at this time.

Upon my arrival in Giddings, I found that the A/C system does have a very rusty secondary pan, and a dirty indoor coil. Gave customer options he choose HK2A HF6A. Will get with Jacob so he can order a second pan. We will need to fix the Darin line , install a new p-trap, a primary safety switch, install a ball valve on the secondary pan. Will need to picked up sprayer to bring to job, 2 techs 3 hours. customer is only available only on Mondays and Fridays, do not schedule in after noon attic is hot.

Upon our arrival in giddings, I replaced the 2 horse power motor and relocated the A/C thermostat to its new location then checked operations. We will need to return when we get the drive and install it. Upon my arrival installed motor drive, tested function and programmed to motor. Left equipment running at 50hz everything was working properly. Made sure customer was okay with noise levels they said it was fine. Left equipment running.

Just finished annual maintenance on a Trane XR16 air conditioner for a customer in Giddings, TX. Conducted a comprehensive inspection of the air filter, ensuring proper airflow. Checked and tightened electrical connections for safety and efficiency. Lubricated moving parts to reduce friction and extend component lifespan. Your AC unit is now operating at peak efficiency.

Just repaired a Lennox XC25 air conditioner for a customer in Giddings, TX. Diagnosed and replaced a faulty compressor to restore cooling capacity. Cleaned and inspected the condenser coil for optimal heat transfer. Checked and adjusted refrigerant levels for efficient operation. Your AC unit is now running smoothly.

Went out to inspect a customer's furnace. The pilot light was out, which was preventing the furnace from igniting. Once the pilot light was relit, I checked the rest of the furnace's components. The air filter was dirty, causing the furnace to work harder than necessary. The filter was replaced and the furnace is now working correctly.

Quick fix for your heat pump glitch in Giddings, TX! Our experts swiftly repaired the compressor unit, ensuring seamless heating and cooling. Don't let the chill linger, get your heat pump running smoothly today!

In Giddings, TX, a great client is primed for spring comfort after undergoing comprehensive HVAC maintenance and cleaning. Our service included inspection and cleaning of air filters, blower assemblies, and condensate drains, ensuring peak efficiency. Thermostat calibration ensures optimal performance.

Upon arrival in Giddings TX Performed heating evaluation, found all components running and operating properly. Found broken petcock to gas line for shutoff. Informed client about it. Client said he wasn’t going to put money into the system due to its age. Would like to schedule a consult for another time.

Upon arrival in Giddings TX Found faulty wiring at indoor unit, replaced and repaired broken/burned wires. Checked all operations after repairs were made. All running and operating properly at this time. Client said she would speak to husband about maintenance agreements on systems.

Went out to a residential home to provide an air conditioning system repair. I carefully looked over the system and discovered that the source of the problem was the permanent air filter. It was becoming blocked which was causing air flow issues. I cleaned out the filter to bring the unit back to operation for the happy customer.

Performed a full system diagnostic tune-up on a customer's HVAC system. The system was thoroughly inspected and the filters were replaced. I cleared out the condensate drain lines, but there were no other issues found with the unit. The continued maintenance will help the HVAC maintain optimal performance no matter the weather.

Went out to assist a residential customer who was experiencing air conditioner failure. After arriving at the home, I found that the evaporator coils were corroded, causing the problem. I replaced the coils and replaced the filters. The system is now operating as it should, providing cool air in the home.

I returned to a customer's home in Giddings for the scheduled installation of an HVAC system. The new system was meticulously Installed and tested for performance, upon completion. The HVAC is running optimally for the home, and the customer is pleased with the replacement.

Went out to assist a customer who needed their air conditioning system repaired. After carefully inspecting the unit, I found that broken wires were causing the system to malfunction. I replaced the thermostat wires to bring the unit back to working order. The customer was thankful for the service.

Provided HVAC maintenance for a residential customer. Upon arrival, I performed a three system tune-up on the units' electrical, mechanical, and safety components, checking for signs of wear and tear. I then ran the system to ensure everything was working correctly. There were no issues found with the unit and the HVAC is running properly for the home.

Upon arrival in Giddings TX Performed heating evaluation on both systems. Found all components running and operating properly at this time. Client would like estimates for surge protection and Reme halo.

Upon arrival in Giddings TX I found that the ball had gone into the air circulation system and bent everything out of shape. The motor still worked but we will need to replace the cage, brackets and wheel. I will send over the quotes in the morning because the parts house is closed.

Went out to a residential home to repair a customer's air conditioning system. I found that the damper motor was failing to open which was causing the unit to malfunction. I replaced the damper motor to bring the unit back to operation. The customer was pleased upon departure.

HVAC maintenance for a return customer. Upon my arrival, I performed a thorough full system diagnostic tune-up. The tune-up helps to ensure the system is operating well for the customer. There were no issues found with the unit and it is working well for the home. The continued maintenance will help keep repair costs down for the customer.

Arrived at a residential home to repair the customer's air conditioning system. After carefully inspecting the unit, I found the bearings on the blower fan had worn out and was causing issues. I replaced the bearings on the blower fan, bringing the air conditioning system back to working order again. The customer was pleased with the service.

Installed a new HVAC system at a residential home. The new unit and all of its components were meticulously installed. Upon completion, the system was checked over to ensure everything was secure, and then tested for performance. The new system is running well and will be more energy efficient for the home.

Went out to a residential customer's home to provide fall maintenance on their HVAC system. The system was thoroughly checked for any factors that could cause issues with performance. The filters were replaced and the condensate drain was cleared. There were no issues found with the system.

Went out to assist a residential customer whose air conditioning system was not working. Upon arrival, I inspected the unit and found that the evaporator coil was leaking. Loose fittings were causing the leak. I tightened the fittings to repair the issue. The system is working properly again, and the customer was thankful for the repair.